Sleep Function; Clock Setting - Tecsun PL-660 Manuel D'utilisation

1. Press & hold the [POWER] button
with the symbol of "
the display to enter sleep timer mode.
2. Rotate the [TUNING] knob
immediately to select sleep timer
from 1 ~ 120 minutes or select
permanently "
turned on after 1 second).
Note: Default setting for the sleep timer is 30 minutes.
1. Press & hold the [TIME] button with
hour flashing, then rotate the
[TUNING] knob to adjust the hour.
2. Press the [TIME] button with minutes
flashing, and then rotate the
[TUNING] knob to adjust the minute.
3. Press again the [TIME] button to
confirm the setting.
If the [TIME] button has not been pressed again within 3 seconds, the unit will
automatically confirm the setting.
You can direct key in the number to set the hour/minutes instead of rotating the
[TUNING] knob.
. -- 18 --

SLEEP FUNCTION

" flashing on
" (radio will be

CLOCK SETTING

www.tecsunradios.com.au