Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
When the preset alarm is activated, you can press the [LIGHT/SNOOZE] button
with "
" or "
will turn on again after 5 minutes later.
Notes:
1. You can press the [TIMER A] or [TIMER B] button repeatedly to turn on/off
the alarm by radio.
If the symbol "
was activated, otherwise, it isn't activated.
2. If the preset alarm is activated, press the [POWER] button once to continuously
listen to the radio; press it twice to turn off the radio.
3. If the preset alarm is activated when you are listening to the radio, it will auto
switch to the preset alarm station.
This radio has an intelligent lighting function with which the backlight would be on
for 3 seconds when operating any keys or knobs.
TURN ON/OFF THE BACKLIGHT:
Press the [LIGHT/SNOOZE] button to illuminate the LCD for 3 seconds; press &
hold the [LIGHT/SNOOZE] button for permanently illumination.
Press it again to turn off the backlight.
Notes:
1. When the unit is powered by the battery, please try to avoid setting the backlight
to permanent illumination so as to reduce power consumption.
2. When the unit is turned off, the permanent illumination function will be turned
off automatically as well.
-- 20 --
.
SNOOZE FUNCTION
" flashing in order to turn off the alarm temporarily, but the unit
" or "
" shows on the display, it means the alarm by radio
INTELLIGENT LIGHT FUNCTION
www.tecsunradios.com.au
Publicité
Table des Matières
