Storage Compartment - M-system MFTD-106 Série Mode D'emploi

ASSEMBLY AND DISMANTLING OF
THE SIDE RUNNER FRAMES
– Fit the side runner frames into the
holes on the side walls inside the
oven (Fig. 7.6).
– Slide the tray and rack into the run-
ners (Fig. 7.7).
The rack must be fitted so that the
safety catch, which stops it sliding
out, faces the inside of the oven (fig.
7.7).
– To dismantle, operate in reverse
order.

STORAGE COMPARTMENT

The storage compartment is accessible
through the pivoting panel (fig. 7.8).
Do not store flammable material in
the oven or in the storage com-
partment.
228
Fig. 7.7
Fig. 7.6
Fig. 7.8