Operating Cycles - Omcan BC-IT-0103-T Manuel D'instructions

Operation
Time-controlled cycle
Compressor output on

OPERATING CYCLES

CORE PROBE INSERTION TEST
Temperature controlled cycles are preceded by a test to check that the needle probe has been inserted
correctly.
If the test fails to record a positive outcome, or if the needle probe is not inserted, the buzzer sounds and the
cycle automatically changes to time-controlled.
The device is capable of managing the following blast chilling and blast
freezing cycles:
• Temperature controlled blast chilling and conservation.
• Hard temperature controlled blast chilling and conservation.
• Time controlled blast chilling and conservation.
• Hard time controlled blast chilling and conservation.
• Temperature controlled blast freezing and conservation.
• Soft temperature controlled blast freezing and conservation.
• Time controlled blast freezing and conservation.
• Soft time controlled blast freezing and conservation.
The blast chilling functions can be accessed quickly by pressing the key
"CHILL".
The blast freezing functions by pressing the key "FREEZE".
In addition to the blast chilling and blast freezing cycles, the controller is able
to manage the following special cycles:
• Pre-cooling.
• Manual defrosting.
• Fish sanitation.
• Ice cream hardening.
The SPECIAL CYCLES menu is accessed by pressing the key "AUX".
12
Blast chilling/blast freezing cycle
completed successfully
Blast chilling/blast freezing cycle not
completed successfully