Control Panel - Omcan BC-IT-0103-T Manuel D'instructions

Operation
EXISTING ELECTRICAL SAFETY REGULATIONS.
THIS BASIC SAFETY REQUIREMENT MUST BE VERIFIED AND, IF IN DOUBT, REQUEST A CAREFUL
CONTROL OF THE PLANT BY PROFESSIONALLY QUALIFIED PERSONNEL.
THE CONSTRUCTOR DECLINES ALL RESPONSIBILITY FOR DAMAGES CAUSED BY THE DISRESPECT
OF AN EFFICIENT EARTHING OF THE PLANT.
• Check that the appliance is perfectly levelled.
• Regulate the adjustable feet if necessary.
• Check that the plastic protective coating is removed from all external surfaces.
• Check that the interior is washed with warm water and a neutral soap.
• Check that the appliance is positioned as far as possible from heat sources.
• Check that the free air circulation around the motor compartment is not obstructed.
• Control the voltage and frequency of the mains distribution, they must fall within the given values: 230 V ±
10% ; 50 Hz / 400 V ± 10% ; 50 Hz

CONTROL PANEL

Each of the 6 keys activates different functions depending on the navigation level or the function currently
running.
• Enables the quick selection of a blast chilling cycle.
• Once a blast chilling cycle has been selected, it makes it possible to switch from temperature
controlled blast chilling to time controlled blast chilling and vice versa.
• Within a menu or when setting a parameter: acts as the "ESC" key and returns the controller to
the page above.
• N.B. When a cycle is in progress the key is not active; to stop the cycle press the "START" key
for 2 seconds.
• Enables the quick selection of a blast freezing cycle.
• Once a blast freezing cycle has been selected, it makes it possible to switch from temperature
controlled blast freezing to time controlled blast freezing and vice versa.
10