Intended Use; Safety Instructions; General Power Tool Safety Warnings - Batavia BT-JCS001 Mode D'emploi

INTENDED USE

Your electric chainsaw has been designed for
trimming the branches of trees, cutting fallen
branches and cutting small logs 25 mm to 100
mm in diameter while the operator is standing
on the ground. This tool is intended for
consumer use only.

SAFETY INSTRUCTIONS

General power tool safety warnings

Warning! Read all safety warnings
and all instructions
Failure to follow all instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for
future reference.
The term "power tool" in all of the warnings
listed below refers to your mains operated
(corded) power tool or battery operated
(cordless) power tool.
1. Work area safety
a. Keep work area clean and well lit.
Cluttered and dark areas invite accidents.
b. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust.
Power tools create sparks which may ignite
the dust or fumes.
c. Keep children and bystanders away
while operating a power tool.
Distractions can cause you to lose control.
2. Electrical safety
a. Power tool plugs must match the outlet.
Never modify the plug in any way. Do
not use any adapter plugs with earthed
(grounded) power tools.
Unmodified plugs and matching outlets will
reduce risk of electric shock.
b. Avoid body contact with earthed or
grounded surfaces such as pipes,
radiators, ranges and refrigerators.
20
Croc Saw Manual.indb 20
All manuals and user guides at all-guides.com
c. Do not expose power tools to rain or wet
d. Do not abuse the cord. Never use the
e. When operating a power tool outdoors,
f. If operating a power tool in a damp
3. Personal safety
a. Stay alert, watch what you are doing and
b. Use personal protective equipment.
c. Prevent unintentional starting. Ensure
TM
There is an increased risk of electric shock
if your body is earthed or grounded.
conditions. Water entering a power tool
will increase the risk of electric shock.
cord for carrying, pulling or unplugging
the power tool. Keep cord away from
heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the
risk of electric shock.
use an extension cord suitable for
outdoor use.
Use of a cord suitable for outdoor use
reduces the risk of electric shock.
location is unavoidable, use a Residual
Current Device (RCD) protected supply.
Use of an RCD reduces the risk of electric
shock.
use common sense when operating a
power tool. Do not use a power tool
while you are tired or under the
influence of drugs, alcohol or
medication.
A moment of inattention while operating
power tools may result in serious personal
injury.
Always wear eye protection.
Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions
will reduce personal injuries.
the switch is in the off-position before
connecting to power source and/or
battery pack, picking up or carrying the
tool.
Carrying power tools with your finger on
the switch or energising power tools that
24-04-14 11:18