What To Do If - Smeg KLF03 Manuel D'utilisation

4.6 What to do if...

Problem
Pouring water becomes more
difficult
The kettle turns off before
boiling
The appliance does not turn
on
Cleaning and maintenance
Cause
Scale build-up on filter
The base of the kettle has
excessive scale build-up
Too little water has been
added to the kettle
The safety device has
tripped out due to the kettle
being operated without
water
The plug is not properly
inserted in the power socket
The cable is defective
Lack of power
Solution
Check that the filter is clean
and correctly positioned
Descale more frequently
Increase the quantity of
water until you reach at least
the minimum level
Let the kettle cool down
before attempting to boil
water again
Insert the plug into the power
socket. Do not use adaptors
or extensions.
Check that the house's main
breaker is on
Have the cable replaced at
an Authorised Service
Centre
Check that the house's main
breaker is on
49