Technical Data - Trevi ME 3104 Manuel D'emploi

English
DESCRIPTION OF CONTROLS
1. Meteorological symbols icons
2. 12/24 hr clock
3. Daters
4. Trend of temperature
5. Humidity
6. Day
7. Battery compartment
8. SNZ Button
9. Mode Button
10. SET button
11. ADJ Button
12. MEM Button
13. Stand
POWER
Open the battery compartment (7) on the back of the unit and
insert two "AAA" batteries matching the polarities.
Remove the batteries if you do not plan to use the device for
a long time.
SETTING THE CLOCK
1. Press the Mode button (9) until you reach the screen of the time.
2. Press and hold the SET button (10) the display will start to flash.
3. Choose the hour format by pressing the ADJ button (11).
4. Press the SET button (10), the hour will start to flash.
5. Set the hours by pressing the ADJ button (11).
6. Press the SET button (10), the minutes will start to flash.
7. Set the minutes by pressing the ADJ button (11).
8. Press the MODE button (9) to confirm.
ADJUST THE CALENDAR
1. Press the Mode button (9) until you reach the screen of the year.
2. Press and hold the SET button (10) the year will start to flash.
3. Set the year by the ADJ button (11).
4. Press the SET button (10), the month will start to flash.
5. Set the month by pressing the ADJ button (11).
6. Press the SET button (10), the day will start to flash.
7. Set the day by pressing the ADJ button (11).
8. Press the MODE button (9) to confirm.
ADJUSTMENT AND ALARM ACTIVATION
1. Press the Mode button (9) until you reach the screen of the alarm.
2. Press and hold the SET button (10) until the display starts to flash
the time.
3. Set the time by pressing the ADJ button (11).
4. Press the SET button (10), the display will start to flash the minutes.
5. Set the minutes by pressing the ADJ button (11).
6. Press the MODE button (9) to confirm.
7. Press the ADJ button (11), to activate the alarm.
8. The display will show the symbol
9. Press the ADJ button (11) 3 times to turn off the alarm.
10. When the alarm is active and is playing press the SNZ button (8)
once, the alarm will stop ringing for 5 minutes.
11. To turn off the alarm when it is sounding, press the Mode button
(9), so the alarm will remain active and will be repeated after 24
hr.
REMINDER FUNCTION
The reminder function marks the hours time with a beep.
.
1. Press the Mode button (9) until you reach the screen of the alarm.
2. Press the ADJ button (11), to activate the alarm.
3. Press the ADJ button (11) to turn off the alarm and activate the
reminder function.
4. The display will show the symbol
5. Press the ADJ button (11) to activate the alarm, then press the
ADJ button (11) to turn off the alarm and reminder.
WEATHER FORECAST
The digital barometer automatically detects the atmospheric
pressure changes accordingly to display the symbol of weather
forecasting (1). This forecast covers the next 12-24 hours.
For example, if the barometer detects a high pressure, the display
will show the symbol of the sun, but externally it could rain, it
applies the 12/24 hours.
notes:
The weather forecast symbols may not reflect the current weather conditions.
They relate only to future conditions.
Forecasts can not be 100% safe due to various factors.
The manufacturer is not liable for any damages or situations caused by
a wrong prediction.
TEMPERATURE AND HUMIDITY
The indication of the temperature is in the lower left corner of the
display, while the humidity value is shown on the right.
Press the SET button (10) to select the unit of measurement of
temperature in °C or °F.
To display the maximum and minimum temperature recorded from
the unit, press the MEM button (12).
To delete the recorded values of minimum temperature, move to
a minimum through the MEM button (12) Press and hold the MEM
button (12) for 2 seconds.
To delete the recorded values of maximum temperature, maximum
carry on through the MEM button (12) Press and hold the MEM
button (12) for 2 seconds.

TECHNICAL DATA

Weather Station:..............0 °C to + 50 °C
Indoor humidity: ...............20% to 90% RH (relative humidity)
Feed unit: .........................0.1 °C for the temperature - 1% for moisture
Clock: ...............................Quartz
Power supply: ..................2xAAA
ME 3104
.