Functions Description; Moon Phase; Technical Data - Trevi SLD 3200 T Manuel D'emploi

English

FUNCTIONS DESCRIPTION

1. Key SNOOZE / LIGHT, temporary deactivation of the alarm /
turn on backlight
2. Clock
3. Alarm symbol
4. Date
5. Weekday indicator

6. Moon phase

7. Weather forecast indication
8. Temperature
9. Key Time Set, setting the date and clock
10. Key Up / ON/OFF, Up key / enable/disable alarm
11. Key Down / CF, Down key / change temperature °C/°F
12. Key Alarm Set, setting the alarm
13. Indoor humidity
14. Battery compartment 3xAAA (not included)
POWER SUpPLY
Open the battery compartment (14) on the rear of the appliance
and insert three "AAA" size batteries respecting the polarities.
SETTING THE CLOCK
1. Press and hold the Time Set key (9) to start the clock setting.
2. Set the hour using the Up (10) or Down (11) keys.
3. Press the Time Set key (9), the minutes will flash on the display.
4. Set the minutes using the Up (10) or Down (11) keys.
5. Press the Time Set key (9), the seconds will flash on the display.
6. Set the seconds using the Up (10) or Down (11) keys.
7. Press the Time Set key (9), the year will flash on the display.
8. Set the year using the Up (10) or Down (11) keys.
9. Press the Time Set key (9), the date will flash on the display.
10. Set the date view month/day or day/month using the Up (10)
or Down (11) keys.
11. Press the Time Set key (9), the month will flash on the display.
12. Set the month using the Up (10) or Down (11) keys.
13. Press the Time Set key (9), the day will flash on the display.
14. Set the day using the Up (10) or Down (11) keys.
15. Press the Time Set key (9), the language will flash on the
display.
16. Set the language using the Up (10) or Down (11) keys.
17. Press the Time Set key (9) to confirm and finish the clock
setting.
18. Set the time display 12/24 hours in by using the Time Set (9)
key.
SETTING AND ACTIVATING ALARM
1. Press and hold the Alarm Set key (9) to start the alarm setting.
2. Set the hour using the Up (10) or Down (11) keys.
3. Press the Alarm Set key (9), the minutes will flash on the display.
4. Set the minutes using the Up (10) or Down (11) keys.
5. Press the Alarm Set key (9), minutes of Snooze interval will
flash on the display.
6. Set minutes of Snooze interval using the Up (10) or Down (11)
keys.
7. Press the Alarm Set key (9) to confirm and finish the alarm
setting.
8. Press the ON/OFF key (10) to turn on the alarm. The display
will show the alarm symbol
9. At the setted hour the alarm will be activated. To temporarily
turn off the alarm press the SNOOZE/LIGHT key (1). The alarm
will reactivate automatically after the interval set in point 6.
10. Press the ON/OFF key (10) to turn off the alarm. The display
will disappear the alarm symbol
COMFORT INDEX
The comfort index displays the status of temperature and humidity.
DRY: any temperature, humidity under 50%.
COMFORT: temperature between 20° C and 27°C, humidity
between 50% and 70%.
WET: any temperature, humidity above 70%.
NO INDICATION: temperature below 20°C or above 27°C, humidity
between 50% and 70%.
TEMPERATURE °C/°F
Press the CF key (11) to select the unit of measurement of tem-
perature in °C or °F.
MOON PHASE
Shows the lunar cycle in four phases (6).

TECHNICAL DATA

Snooze range: .............. from 5 to 60 minutes
Weather station: ........... from 0°C to +50°C
Indoor humidity: ............ from 20% to 99% RH (relative humidity)
Unit: .............................. 0,1°C for the temperature
............................... 1% for the humidity
Watch: .......................... Quartz
Power SUpply: .............. 3xAAA
SLD 3200 T
(3).
(3).
3