Remote Control Instructions - Toshiba RAC-PD0812CRRC Manuel D'utilisation

REMOTE CONTROL INSTRUCTIONS

Remote Control Specifi cations
M
Rated voltage
Signal receiving range
Environment
N
Function Buttons
Before you begin using your new air conditioner, make sure to familiarize yourself with its remote
control. The following is a brief introduction to the remote control itself. For instructions on how to
operate your air conditioner, refer to the Operating Instructions section of this manual.
ON/OFF
Turns the unit on or off.
Scrolls through operation modes
as follows:
AUTO COOL DRY HEAT
NOTE:
Please do not select HEAT mode
if the machine you purchased is
cool-only type. Heat mode is not
supported by cool-only models.
FAN SPEED
Selects fan speeds in the
following order:
AUTO LOW MED
Saves energy during
sleeping hours.
Starts and stops
louver movement.
Page 20
o d l e
ote
MODE
FAN
HIGH
SLEEP
SWING
RG57H4(B)/BGEF
3.0V (Dry batteries R03/LR03x2)
8 m (approx. 26 ft.)
-5°C ~ 60°C (23°F ~ 140°F)
To prevent damage,remove the batteries when not
being used for a long time.
TEMP
Increases temperature in 1°C (1°F) increments.
Max. temperature is 30°C (86°F).
TEMP
Decreases temperature in 1°C (1°F) increments.
Max. temperature is 17°C (62°F).
NOTE: Pressing and holding
together for 3 seconds will alternate the
temperature display between the °C & °F scale.
SHORT CUT
Sets and activates your favorite pre-settings.
PRESET
TIMER ON
MARCHE/
ON
Sets timer to turn unit on (see How to Use
Basic Functions for instructions)
ARRÊTER/
OFF
TIMER OFF
Sets timer to turn unit off (see How to Use
Basic Functions for instructions)
LED
Turns indoor unit's LED display on and off.
If you are sensitive to light while sleeping,
you can press the LED button to turn off
the LED display on the unit. Press the
button again to turn it back on.
FOLLOW ME
Temperature sensing and room
temperature display button.
and buttons
User Manual