Maintenance And Cleaning; Handling - Renkforce MP777 Mode D'emploi

Maintenance
and cleaning
Servicing or repair may only be carried out by a specialist/specialist workshop. The product
contains no parts that require servicing. Therefore, do not open it.
To clean the outside of the product, a dry, soft and clean cloth is sufficient.

Do not press too hard on the display or the housing, as this may cause scratch
marks or lead to faulty displays.
Dust can easily be removed with the help of a clean brush and a vacuum cleaner.

Handling

Take note of all safety instructions contained in this operating manual
and all further information specific to the handling of the product.
The product is not a toy and should be kept out of the reach of children. The product contains
small parts, glass (display) and an accumulator.
The device must not be opened or disassembled.
None of the components inside the product is to be maintained by the user. If opened of taken
apart, the CE approval as well as the warranty/guarantee will be void.
Do not drop the product even from a low height as this might damage it.
Avoid the following adverse environmental condition when operating the product:
- Excessive humidity or dampness
- extreme cold or heat
- direct sunlight
- Dust or combustible gases, vapours or solvents
- Strong vibrations
- strong magnetic fields such as those found in the vicinity of machinery or loudspeakers
56
All manuals and user guides at all-guides.com
Operating manual

English