Maintenance And Cleaning; Handling - Renkforce C11 Mode D'emploi

All manuals and user guides at all-guides.com
Maintenance
and cleaning
Maintenance or repairs may only be carried out by a specialist or a specialised repair shop.
There are no components inside the product that require maintenance. Therefore, do not open
it.
To clean the outside of the product, a dry, soft and clean cloth is sufficient.

Do not press too hard on the display to avoid scratch marks or faulty displays.
Dust can easily be removed with a clean brush and a vacuum cleaner.

Handling

Observe all the safety information in these operating instructions and all
additional information concerning the handling of the product.
The product is not a toy and must be kept out of the reach of children. Is contains small parts,
glass (display) and a rechargeable battery.
The device must not be opened or disassembled.
The device contains no parts that require servicing. If opened or taken apart, the CE approval
as well as the warranty/guarantee will be void.
The product will be damaged if dropped even from a low height.
Avoid the following adverse ambient condition when operating the product:
- moistness or high humidity
- extreme cold or heat
- direct sunlight
- dust or flammable gases, fumes or solvents
- strong vibrations
- strong magnetic fields as present near machines or loudspeakers
72
Operating manual

English