Maintenance And Cleaning; Handling - Renkforce MPF337 Mode D'emploi

Maintenance
and Cleaning
Servicing or repair may only be carried out by a specialist/specialist workshop. The product
contains no parts that require servicing. Therefore, do not open it.
To clean the outside of the product, a dry, soft and clean cloth is sufficient.

Don't press too hard on the display, this may cause scratch marks or lead to
failure of the display.
Dust can easily be removed with the help of a clean brush and a vacuum cleaner.

Handling

Take note of all safety instructions contained in this operating manual
and all further information specific to the handling of the product.
The product is not a toy and should be kept out of the reach of children. The product contains
small parts, glass (display) and a rechargeable battery.
The device must not be opened or disassembled.
None of the components inside the product are to be maintained by the user. If you open/take
apart the device, the license (CE) and the guarantee/warrantee will expire as well.
Dropping the product even from a low height will damage it.
Avoid the following adverse environmental conditions when operating the product:
- Excessive humidity or dampness
- Extreme cold or heat
- direct sunlight
- Dust or combustible gases, vapours or solvents
- Strong vibrations
- Strong magnetic fields such as are found in the vicinity of machinery or loudspeakers
62
All manuals and user guides at all-guides.com
Operating Instructions

English