Changing The Water In The Boiler; (1 St Daily Switch-On); Cup-Warmer (Where Contemplated) - LaCimbali M34 SELECTRON Utilisation Et Installation

11. Changing the water in the boiler (1

st
1 Daily Switch-On: Before operating the ma-
chine change the water in the boiler.
Ensure that the indication on the display corresponds to
the working pressure value.
Keep a hot water distributor key (12) pressed down for
approximately 5 seconds.
The following message will be displayed: "WATER
CHANGE". The water from the boiler will drain from the
hot water nozzle (8) (60 - 70% ca. of the total capacity).
The boiler resistance and all dispensing keys will be disabled.
Dispensing will stop automatically (Note. The delivery can
be interrupted in whichever moment by means of the push
button 12).
After the procedure, the machine will return to its normal
23
CAUTION: do not put any cloth on the cup-
warmer.
The machines have a cup warmer tray (23) for stocking
and pre-heating the cups.

12. Cup-Warmer (where contemplated)

22
st
Daily Switch-On)
Only place cups and glasses used with the coffee machine
on the cup tray. No other objects must be placed on
the tray.
Thoroughly drain the cups before placing them on the tray.
To activate the resistance of the cup warmer tray (23) press
button (22
(22) key a number of times.
- = maximum power symbol
- = medium power symbol
- = minimum power symbol
- no symbol = OFF
Therefore, to disable tray heating (23), press the key (22)
several times until no symbol is visible on the display.
N.B. The heating of the cup warmer tray (23) is deactivated
during the automatic switch off phase.
The condition in effect at the time when the machine was
switched off will be restored the next time the machine
automatically switches on.
11 EN
12
8