How to Use
10
Turn control knob back to the
STANDBY position.
10
All manuals and user guides at all-guides.com
(cont.)
11
Push ON/OFF button to OFF (O).
Unplug unit from outlet.
12
Wait about 1 minute before
unlocking the lever and removing
filter holder. This will allow any
water still flowing through the
pump to finish.
NOTES:
• Some water may continue to
drip intermittently from brew
head. This is normal and a
result of product operation.
• This unit has a steam purge in
the drip tray that will cycle if
there is any water remaining in
the heater. Some steam may
escape under the drip tray—this
is normal.