LINEA
54 04 53xx
Step 6 : Use the parts AB4 of step 4, AB5 of step 5, twelve connectors C, eight shelves supports F and
two clothes rail holders J
Tighten three connectors (C) into the drillings at the bottom and on top of the right side (AB5 RH). Push
four shelf supports (F) in the drillings on the innersides of the side and make sure they are at the same
height. Push a clothes rail holder (J) in the hole on the top of the side. Push the right cornice (AB4 RH)
with its connectors in the drillings and over the wooden dowels of the side. Tighten the eccentrics. Repeat
with left-hand parts (AB4 LH and AB5 LH)
Step 7 : Use both doors EB7, six hinges H and twelve wood screws E
Push the hinges (H) into the drillings of the doors (EB7) and tighten with two wood screws (E).
Kleerkast met twee draaideuren
Schrankwand mit zwei Türen
Armoire avec 2 portes battantes
Wardrobe with two doors
Quax
Quax
First dreams
First dreams
®
®
First steps
First steps
37