Quax LINEA 54 04 53 Serie Manuel page 35

Table des Matières

Les langues disponibles

LINEA

54 04 53xx

4. Assembling the wardrobe

Step 1 : Use the top EB1 and six connectors C

Tighten the connectors (C) in the drillings at the bottom of the top (EB1).

Step 2 : Use the ﬁ xed shelf EB5, four wooden dowels A, six eccentrics B, two door openers I and four

wood screws E

Push two wooden dowels (A) into the drillings on the sides of the ﬁ xed shelf (EB5). Push the eccentrics

(B) into the holes on the ends of the shelf. Put the door openers (I) mounting plates on the drillings at the

bottom of the shelf. Fix them with the wood screws (E). Push the openers on their plates.

Step 3 : Use the bottom EB4, four wooden dowels A and six eccentrics B

Push two wooden dowels (A) into the drillings on the sides of the bottom (EB4). Push the eccentrics (B)

into the holes on the ends of the bottom.

Kleerkast met twee draaideuren

Schrankwand mit zwei Türen

Armoire avec 2 portes battantes

Wardrobe with two doors

Quax

First dreams

First steps

Table des Matières