Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Cleaning and Care
What?
Remove ash from the stove.
Clear the stove and chimney flue
pipes from soot depositions
Clean enamelled surfaces.
Clean the glass pane.
Clean the stainless steel parts
How often?
As required, only when cold.
Caution: the ash does not need to be
completely removed from the
combustion chamber floor. A small
amount of remaining ash is beneficial
to combustion.
(CAUTION: always completely empty
the ash pan !).
After every heating season.
As required, only when cold.
As required, only when cold. Before
spraying the glass pane with glass
cleaner, roll up some paper kitchen
roll into a cylinder and place it in the
door frame at the bottom so that no
cleanser can run between the door
frames and the glass.
As required, only when cold.
With what?
Remove the ash pan and remove the
remaining ash with an ash shovel or
ash vacuum.
With soot brushes and vacuum
cleaner.
We recommend that maintenance is
carried out by a specialist dealer.
Wipe with clean water and a soft
cloth.
Spray with stove glass cleaner (e.g.
from CERA-Design) and wipe.
Protect with a stainless steel cleaning
agent, and perhaps with a stainless
steel care spray.
CERA-Design
by Britta v. Tasch GmbH
Am Langen Graben 28
52353 Düren, Germany
Telefon:
+49 (0)2421-121790
Fax:
+49 (0)2421-1217917
e-mail:
info@cera.de
Publicité
Table des Matières
