CERA-Design faro Manuel page 50

Maintenance
Every stove should be maintained by a professional once a year. This is particularly
important in low-energy and passive houses! Here the professional will check all connection
pieces and seals among other things.
Spare Parts
Please request any necessary spare parts from your specialized company.
Special Instructions:
 The manufacturer's warranty will become void on extended or constant overloading of the
stove's rated heat output, as well as the use of other fuels except those allowed.
 For safety reasons, keep the combustion chamber door closed at all times, even when the
stove is not in use.
 Do not remove hot ash. Only tip ash into fireproof, non-flammable containers.
 Never use spirits, petrol or other flammable liquids to light the fire.

No objects of combustible material are allowed to be positioned within a distance of 80cm,
measured from the viewing window, of the direct stove heating area (=sides from where
the fire is visible).

We reserve the right to make implementation and dimensional changes serving technical
progress. You can find current facts and information on the Internet at
What if...?
... the fire doesn't burn properly?
... the room doesn't get warm enough?
... the room gets too warm?
... smoke comes out when I put fuel on the fire?

Is the chimney or flue pipe leaking?
 Is the chimney properly dimensioned? Are the
cleaning vents open or leaking?
 Is the outside temperature too high?
 Is a door on another fireplace connected to this
chimney open?

Is the heating requirement too high – the stove too
small?

Is the firewood too moist?
 Is the amount of wood added too small?

Is the feed pressure too high?
 Is the amount of wood added too large?

The stove doors were opened too quickly.
 The supply pressure is too low.
 The firewood has not yet burnt sufficiently.
49
www.cera.de