Caviss V1150TBE4 Notice D'utilisation page 28

Added accessories
You can purchase extra shelves (fixed or sliding) from your distributor or after-sales service to increase the flexibility
of your device.
MOVING OR ADDING SHELVES
Inserting a Rack Fixed Shelf
Align rack clips with the desired wall fittings, press the
back of the rack (A) down in order to completely fit the
A
clip in the slot. Repeat in the front clip (B).
Make sure the rack is completely secure to side wall.
Removing Fixed Racks
Pull up front rack (B) until the clip is loose from the
side wall, repeat on the back of the rack (A).
Installing Fixed Shelves
Put the shelf above the dampers, slide it back so that
it fits and cannot move forward. (2).
B
1
2
Inserting a Sliding Shelf Rack
Align the back clip with the desired wall fitting,
push back in order to completely fit the clip in the
slot (C).
C
Align the front clip with the slot pressing it down in
order to completely fit the clip in the slot (D).
C
Make sure the rack is completely secure to the
side wall.
Removing Sliding Shelf Racks
D
Pull up the front rack until (D) the clip is lose from
the side wall, pull back clip out (C) of the slot in your
direction.
Inserting a Sliding Shelf
Insert the sliding shelf above the rack rollers (1),
D
allowing it to slide into the guides (2).
1
2
27