Using Your Dryer - Whirlpool WETLV27HW Guide D'utilisation Et D'entretien

USING YOUR DRYER

WARNING: To reduce the risk of fire, electric shock, or injury to
persons, read the Important Safety Instructions before operating
this dryer.
Before using your dryer, wipe the dryer drum with a damp cloth
to remove dust from storing and shipping.
1.
Clean the lint screen
Clean the lint screen before each load.
Pull the lint screen straight up. Roll lint off the screen with your
fingers. Push the lint screen firmly back into place.
Do not rinse or wash screen to remove lint. For additional
cleaning information, see "Cleaning the lint screen."
2.
Load the dryer
Place laundry in the dryer. Close the door.
NOTE: Your model may have a different door than the
one shown.
Do not tightly pack the dryer; clothes should be able to
tumble freely.
14
3.
Select cycle
Select the desired cycle for your load. See "Dryer Cycle
Guide" for more information about each cycle.
Normal and Delicate Cycles
You can select a different dryness level, depending on your
load, by turning the knob to the desired dryness level.
Selecting Very Dry or Less Dry automatically adjusts the
dryness level at which the dryer will shut off. Once a dryness
level is set, it cannot be changed without stopping the cycle.
These automatic dry cycles give the best drying in the shortest
time. Drying time varies based on fabric type, load size, and
dryness setting.
NOTE: Very Dry removes more load moisture. Less Dry
removes less moisture and is used for loads you may want
to put on a hanger to complete drying.