Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
•
Select the fan speed by pressing the
You can choose:
Minimum speed: for silent operation.
Medium speed: reduces noise levels while main-
taining a comfortable temperature.
Maximum speed: to achieve the target tempera-
ture as rapidly as possible.
the appliance automatically selects the
most suitable fan speed in relation to the temperature set on the
digital display and current room temperature.
The most suitable temperature for the room during the summer
varies from 75°F to 81°F (24 to 27°C). You are recommended, how-
ever, not to set a temperature much below the outdoor temperature.
WHISPER COOL (available in conditioning mode only)
By activating this function, the operating noise is further re-
duced. To activate it, touch the
The display shows the relative symbol (C17).
DEHUMIDIFYING MODE
Ideal to reduce room humidity (spring and autumn, damp
rooms, rainy periods, etc). In dehumidifying mode, the appli-
ance MUST be set-up in the same way as for air conditioning,
with the air exhaust hose (B2) attached to enable the moisture
to be discharged outside. To set this mode:
Touch repeatedly the MODE button until the dehumidify-
•
ing symbol is displayed.
FAN MODE
When using the appliance in this mode, the air exhaust hose
(B2) does not need to be connected.
To set this mode:
Touch repeatedly the MODE button until the fan symbol is
•
displayed.
•
Select the fan speed by pressing the
button (C6).
(C7) button.
button (C6).
You can choose:
Minimum speed: for silent operation.
Medium speed: reduces noise levels but still main-
tains a good level of comfort.
Maximum speed: for maximum fan power.
CHANGING TEMPERATURE SCALE
The temperature can be displayed in °F or °C. To change the tem-
perature scale, turn o the unit by pushing the
keep pushed the MODE button for approximately 20 seconds.
The appliance emits a beep to con rm.
SETTING THE TIMER
The timer can be used to delay appliance start up or shutdown.
This avoids wasting electricity by not operating the appliance
when it is not needed.
How to program delayed start up
•
Plug the appliance into the mains and turn the unit to
standby.
•
Touch the timer button (C3): the timer symbol (C13) and
the number of hours come on.
Use the + (C4) or - (C5) buttons to set the number of hours
•
delay before the appliance comes on.
•
The appliance works using the mode previously set.
The appliance can be set to come on within the next 24 hours.
A few second after set, the setting is memorised, the timer sym-
bol is lit and the display shows that the appliance is in standby.
To delet the setting, touch two times the timer button (C3). The
timer symbol (C13) switches o .
How to program delayed shutdown
•
With the air conditionin on, in every mode, it is possible to
set the delayed shutdown.
•
Touch the Timer (C3) button: the timer symbol (C13) and
the hours switch on.
•
Use the + (C4) or - (C5) buttons to set the number of hours
delay before the appliance turns o .
A few second after set, the setting is memorised, the timer sym-
bol is lit and the display shows the current mode.
At the end of the set time the appliance automatically turns in
standby mode.
To delet the setting, touch two times the timer button (C3). The
timer symbol (C14) switches o .
9
button, then
Publicité
Table des Matières
