Reset To Zero; Settings; Auto-Turn Off Configuration - Gram CR Série Manuel D'utilisation

Reset to zero

Press the key for 1 second to reset the display to zero.
The message "ZERO" will appear on the display and the

display will remain at zero.
The reset-to-zero function cannot be made if the reading is not stable or a

tare has been made.
The reset-to-zero function cannot be made if the weight value is above the

manual zero range.
Setting
To access to the setting mode, press at the same time the
and HOLD / U keys for 1 second.
Press the key to access to Auto Turn off configuration.
Press the HOLD / U to select the desired mode.
4