Accessories - Honeywell MP920B Instructions D'installation

MP920B PNEUMATIC DAMPER ACTUATOR

ACCESSORIES

14004062-001 Mounting Bracket Assembly
14004241-002 Clevis Pin Kit
14004345-001 Positive Positioner Kit:
– 1 positive positioner assembly
– 1 bandstrap
– 1 lever (straight)
– 1 lever (bent)
– 1 feedback spring (10 psi [69 kPa])
– 1 nut 9/16-18
– 1 washer 9/16 in.
– 2 nuts 3/8-16
AK3556 Pipe Mounting Bag Assembly:
– 2 pipe clamps with 4 nuts (1-1/4 in. O.D.)
– 1 outer bracket
– 1 swivel bracket
– 4 nuts 1/4-20
– 1 pivot pin 1/4 in. diameter
– 2 hitch pin clips
– 4 flat washers
AK3557 Clevis Bag Assembly:
– 1 clevis
– 2 nuts 3/8-16
– 1 socket set screw 3/8-16
– 1 cotterless clevis pin 1/4 in. diameter
AK3558 Swivel Bracket Assembly:
– 1 swivel bracket
Automation and Control Solutions
Honeywell International Inc. Honeywell Limited-Honeywell Limitée
1985 Douglas Drive North 35 Dynamic Drive
Golden Valley, MN 55422 Scarborough, Ontario
M1V 4Z9
95-6063EF B.B. 7-04
– 2 cotterless clevis pins 1/4-in. diameter
– 1 pivot pin 1/4 in. diameter
– 2 hitch pin clips
– 4 nuts 1/4-20
AK3559 Heavy Duty Clevis Bag Assembly:
– 1 clevis
– 1 clevis pin 1/4 in. diameter
– 1 hitch pin clip
– 1 socket cap screw
– 2 washers 3/8 in.
– 1 sleeve
– 1 coupling 5/8-11 to 9/16-18
– 2 nuts 5/8-11
AK3560 3/8 in. Ball Joint to 5/8-11 Shaft Assembly:
– 1 coupling 5/8-11 to 9/16-18
– 1 coupling 5/8-11 to 3/8-24
– 2 nuts 5/8-11
– 2 nuts 3/8-24
– 2 split washers 3/8 in.
– 1 split washer 3/8 in.
– 1 ball joint 3/8-24
AK3561 3/8 in. Ball Joint to 3/8-16 Shaft Assembly:
– 1 coupling 3/8-16 to 3/8-24
– 2 nuts 3/8-24
– 2 flat washers 3/8 in.
– 1 split washer 3/8 in.
– 2 nuts 3/8-16
– 1 ball joint 3/8-24
www.honeywell.com