Mopar 82212124AC Manuel D'installation page 18

18
IN/OUT
NOTE: In/out door adjustment is done by loosening
the hinge to body fasteners one hinge at a time and
moving the door to the correct position.
1. Support the door with a suitable lifting device.
2. Loosen the latch striker bolts (3).
3. Loosen the hinge to body fasteners (2) and (3),
4. Adjust the door to the correct position.
5. Tighten the hinge to body fasteners to 28 N∙m (21 ft.
lbs.).
Mar 31, 2009 K6860781 Rev. 1