Publicité
Liens rapides
FITTING INSTRUCTIONS FOR RGH0003BK REAR WHEEL HUGGER
TRIUMPH TIGER 800 2011
THIS KIT CONTAINS THE ITEMS PICTURED AND LABELLED BELOW.
DO NOT PROCEED UNTIL YOU ARE SURE ALL PARTS ARE PRESENT.
Please note that the way the kit is packed does not necessarily represent the way
of mounting to the bike
T
HE PARTS SHOWN MAY BE REPRESENTATIVE ONLY
Unit 1, Shelley's Lane, East Worldham, Alton, Hampshire, GU34 3AQ
Tel: +44 (0)1420 89007 Fax: +44 (0)1420 87301
(Not Suitable for Off-Road Knobbly Tyres)
(
FOR CLARITY OF INSTRUCTIONS ONLY
A
C
R&G Racing
www.rg-racing.com
HUGGER
(HUG0003)
Email:
info@rg-racing.com
)
B
Publicité
Manuels Connexes pour R&G RGH0003BK
Sommaire des Matières pour R&G RGH0003BK
- Page 1 FITTING INSTRUCTIONS FOR RGH0003BK REAR WHEEL HUGGER TRIUMPH TIGER 800 2011 (Not Suitable for Off-Road Knobbly Tyres) THIS KIT CONTAINS THE ITEMS PICTURED AND LABELLED BELOW. DO NOT PROCEED UNTIL YOU ARE SURE ALL PARTS ARE PRESENT. Please note that the way the kit is packed does not necessarily represent the way...
- Page 2 R&G LARGE BUBBLE STICKER (RGS0011) M6x16mm LONG BUTTON HEAD BOLTS (x2) SCREW RIVIT (RIV0001) (x1) SPACERS (S430) (x2) TOOLS REQUIRED 4 and 5mm A/F ALLEN KEY. 8mm SOCKET AND WRENCH. 5mm DRILL BIT AND DRILL. THREAD LOCK. FITTING INSTRUCTIONS 1.
- Page 3 IMPORTANT: WHEN FITTING THE HUGGER, IT MUST BE POSITIONED AS ILLUSTRATED ABOVE SO THAT THE HUGGER WILL NOT CONTACT THE REAR WHEEL. IT IS YOUR RESPONSIBILITY TO CHECK FOR THIS POSSIBILITY AND TAKE AVOIDING ACTION. FAILURE TO CHECK THIS COULD RESULT IN SERIOUS INJURY. ISSUE 2 10/06/2011 (NSY) CONSUMER NOTICE...
- Page 4 FRANCE INSTRUCTIONS DE MONTAGE RGH0003BK TRIUMPH TIGER 800 2011 Attention - Ne convient pas aux pneus hors route ou aux pneus tout terrain VEUILLEZ VERIFIER QUE TOUTES LES PIECES SONT PRESENTES DANS LE KIT AVANT DE COMMENCER LE MONTAGE. OUTILS NECESSAIRES ...