DeLOCK 62899 Mode D'emploi page 2

English
Description
This USB Hub by Delock can be connected to a computer via the USB Type-A
interface. It expands the computer by three USB Type-A connectors as well
as two slots for SD and Micro SD memory cards. If the hub is connected to a
computer with a USB 3.2 interface, a maximum current of 900 mA is divided
between the USB ports and the card reader. If necessary, an optional power
supply or an optional power cable can be connected to the power socket.
Specification
• Connectors:
1 x SuperSpeed USB 5 Gbps (USB 3.2 Gen 1) Type-A male >
3 x SuperSpeed USB 5 Gbps (USB 3.2 Gen 1) Type-A female
1 x SD slot
1 x Micro SD slot
1 x 5 V DC jack
• Chipset: Genesys Logic GL3520 (Hub), GL3224 (Card Reader)
• Data transfer rate up to 5 Gbps
• The Card Reader supports following memory cards:
1. Slot Secure Digital
SD, SD3.0 UHS-I, SD High Capacity (SDHC), SD Ultra, SDHC Ultra, SDXC,
MMC-I, MMC-II, MMC 4.0, Mini SD, Mini SDHC, MMCmobile, RS-MMC, RS-
MMC 4.0
2. Slot Micro Secure Digital
Micro SD, Micro SDHC, Micro SDHC Ultra, T-Flash, MMCmicro
• USB cable directly on the hub (length ca. 15 cm)
• Dimensions (LxWxH): ca. 90 x 40 x 13 mm
• 1 x ferrite core
• Colour: black
• Plug & Play
Specification of power connector
• 5 V, ground outside, plus inside
• Dimensions:
inside: ø ca. 1.35 mm
outside: ø ca. 3.5 mm
length: ca. 9 mm
-2-