Velleman VMB4PD Instructions En Bref page 5

3. Buttons and display overview
The module consists of 4 push buttons with corresponding LED indication and one configuration push button. The label for each push
button is displayed on the LCD. Due to the use of 2 pages, up to 8 commands (buttons) are possible.
The module will display the first 4 commands by default ( Main page ).
MAIN PAGE
Next
Switch between the displays at any time by pressing the
small configuration button.
The module switches back to the main page after 15 seconds
of inactivity (except when the time is displayed).
How a specific push button will control a particular module is explained in the learning mode of the output modules.
The indication LED has two levels, the low level serves as button backlight, the high level indicates an action on this button.
It is possible that the indication LED is incorrect, if more than 1 output function is programmed to the same button.
SECONDARY PAGE
TIMER OVERVIEW PAGE
A
B
If the timer option is enabled (see page 7) then the timer can be
displayed. On this panel we see:
A. Main page button has a timer, but the timer is disabled.
The secondary page button has no timer function.
B. The buttons on main and secondary page have a timer and the
timers are enabled.
C. The button on the main page has a timer and the timer is enabled,
the button on the second page has a timer but is disabled.
D. The main and secondary page buttons have no timer functions.
ENGLISH
C
D
5