Velleman VMB4PD Instructions En Bref page 8

ENGLISH
7. Editing the button labels (can also be done using a PC and the Velbuslink software)
8. Set the reaction time of each button (can also be done using a PC and the Velbuslink software)
8
1. Go to the second configuration menu (long press the small button, then press again)
2. Press the lower right "Labels" button to start the editing page (blinking digit).
Use the upper buttons to select a position, use the lower buttons to select a character.
Keep one of the lower buttons pressed to quickly scroll to a character, the scrolling will always stop at
a "space".
The small button to go to the next label page, press again to exit.
To prevent accidental button action, it is possible to set a reaction time on each of the eight buttons
(4 on first page and 4 on second page). Default the reaction time is set as direct (0s).
1. Go to the second configuration menu (long press the small button, then press again)
2. Press the lower left "Reaction" button to display the reaction set-up menu .
Press the lower buttons to change the reaction time of the above displayed buttons, each press will select:
0s (direct), 1 second, 2 seconds, 3 seconds reaction time.
The small button to go to the next label pages, press again to exit.