AquaScape 2000 Mode D'emploi page 7

• Carefully align the indented lid
clamping spots with the clips
on the canister, making sure
that the tab on the lid lines up
with the tab on the tank. This
will allow for easy removal of
the lid. Once aligned, close
all the lid clips tightly. This
will seal the UltraKlean Pond
Filter lid to the canister.
NOTE: The lid clips may require force in order for
the lower portion of the clip to lock securely to place.
• The UltraKlean Pond Filter includes
three plumbing ports:
• In – Pipe from pump
• Out – Pipe back to pond
• Wash – Connection to backwash
aquascapeinc.com | CAN (866) 766-3426 |
• Do not use lid clips to lift the UltraKlean Pond Filter. This
could damage the clips. Instead lift the unit from under the
lip of the canister, gripping the canister lip in between any
of the clips.
OUT
Filtered Water
• Locate and attach the included discharge shutoff valve
(with fl at rubber gasket) and threaded adapter to the back-
wash plumbing port.
US (866) 877-6637
IN
Pond Water
IMPORTANT: Do not use tools to attach the
fi ttings. Fittings should be hand-tightened
and installed with the fl at rubber gaskets
(in each fi tting) to achieve leak-free seals
OUT
Backwash
7