Orbegozo WF 0250 Manuel D'instructions page 10

WF 0250
HOW TO FIX THE FAN
Fix the supporting tab onto wall
Position the accessory metallic supporting tab on wall by using the attached
anchor screws as shown in the figure.
Mount the fan
Slide the fan onto the tab by aligning the opening on the bottom of control box
with the tab.
HOW TO USE THE FAN
-Pull the fan speed switch for adjusting speed of fan
-Push the guard lightly to the desired up or down direction. Pull the oscillation pullswitch
for oscillation, the fan will be in stop position when you pull this switch again.
CARE, CLEANING & STORAGE
The fan blade and grill set should be cleaned regularly for most efficient operation. Unplug the fan,
•
then reserve the assembly procedure to remove those parts from the motor assembly before cleaning.
Wipe with a damp cloth then towel dry.
Never immerse any fan components in water. Wipe the fan only with a dry or slightly moist cloth, then
•
immediately towel dry.
Always store the fan in a cool dry location.
•
10