Samsung WW10K64 Serie Manuel D'utilisation page 33

Options
Option
Intensive
Pre Wash
Bubble Soak
Delay End
You can set the washing machine to finish your wash automatically at a later time, choosing
a delay of between 1(60minute) to 24 hours (in 1 hour increments). The hour displayed
indicates the time the wash will finish.
1. Select a cycle. Then change the cycle settings if necessary.
2. Press Delay End repeatedly until a desired end time is set.
3. Press Start/Pause.
The corresponding indicator turns on with the clock running.
4. To cancel the Delay End, restart the washing machine by pressing Power.
Real-life case
You want to finish a two-hour course 3 hours later from now. For this, you add the Delay End
option to the current cycle with the 3-hour setting, and press Start/Pause at 2:00 p.m.
Then, what happens? The washing machine starts operating at 3:00 p.m., and ends at 5:00
p.m. Provided below is the time line for this example.
2:00 pm
Set the Delay End to 3 hours
WW10K6410QX_DC68-03676Y-00_EN.indd 33
• For badly soiled laundry. The operation time for each cycle is
longer than normal.
• This will add a preliminary washing cycle before the main
wash cycle.
• Bubble Soak helps remove a variety of stubborn stains.
• With Bubble Soak selected, laundry is thoroughly soaked in
water bubbles for effective washing.
• Bubble Soak is available with and adds up to 30 minutes to
5 cycles: COTTON, SYNTHETICS, SUPER SPEED, BEDDING and
BABY CARE.
3:00 pm
Start
Description
5:00 pm
End
English 33
2017/5/16 10:49:25