Using The Headphones - Audio-Technica ATH-CK2000Ti Manuel De L'utilisateur

■ Using the headphones

1. Identify the left (L) and right (R) connectors on the
included detachable cable and plug each into the
appropriate connector jack until it clicks.
• Refer to "About the detachable cable" for detailed
information.
2. Lower the volume on the device you intend to use,
then connect the "Input plug" to the device's
headphone jack.
3. Make sure to place each eartip (LEFT/RIGHT) in the
correct ear.
4. Turn on your audio device, and adjust volume as
necessary.
• Also read the user manual of your audio device.
■ Care
Get into the habit of regularly cleaning the product
to ensure that it will last for a long time. Do not use
alcohol, paint thinners or other solvents for cleaning
purposes.
• Use a dry cloth to clean the headphones. Do not
allow the cloth to touch the sound producing area
because it is more susceptible to damage.
• Use a dry cloth to clean the cable of any sweat
or dirt. Failure to clean the cable may cause it
to deteriorate and harden over time, resulting in
malfunction.
• Wipe the plugs on cable with a dry cloth if dirty.
Using the plugs without cleaning them can cause
sound interruption or distortion.
• For long-time storage, keep the product in a well-
ventilated place without high temperatures and
humidity.
• Refer to ''Cleaning the eartips'' in ''About the eartips''
to learn how to clean the eartips.
4
JA
EN
FR
DE
IT
ES
PT
RU
SC
TC
KO