Intensities
×3
×2
×1
Getting Started
Charging your Cordless Power Flosser
2
1
Deep clean:
This mode utilizes Pulse Wave technology, to guide you
tooth by tooth, using strong and gentle pulses of water
for a thorough clean.
With Pulse Wave technology the flow of the water
increases and decreases in intensity, providing a brief
pause during which you can move the nozzle to the next
space between your teeth.
Your Cordless Power Flosser comes with three different
intensity settings. To change the intensity to the setting
you prefer, press the intensity button.
Note: It is recommended to start using this Power Flosser
on the lowest intensity and increase the intensity over the
course of a few weeks.
1 Gently pull and rotate the charging port cover on the
back of the Cordless Power Flosser to expose the
charging port .
2 Plug the USB-C charging cable into the USB-C
charging port on the back of the Cordless Power
Flosser.
Note: Make sure the handle is completely dry before
you connect the USB-C cable.
3 Connect the USB cable into a 5V USB wall adapter.
Note: Wall adapter not included in all models. Only
use a 5V IPX4 adapter.
11
English