Publicité
Les langues disponibles
Les langues disponibles
Quick start guide
English
LX 200 luxmeter is a hand-held luxmeter designed for illuminance measurement.
Operating temperature, information on storage and power supply
•
Operating temperature: 0 to 50 °C (+32 to +122 °F)
•
Storage temperature: 0 to 50 °C (+32 to +122 °F)
•
Power supply: 3 batteries 1.5 V type LR3-AAA
1
Device description
3
2
1
5
4
6
2
Set language
About
3
Set unit
About
1. Function key
2. Function key
3. Function key
4. Back to previous screen key
5. Screen key
6. On / Off key
By Pressing French and English
keys you can choose language:
French or English.
A press on Lux or Fc keys allows
the choice measurement unit:
Lux or Footcandle.
4
Instantaneous illuminance
Once switched, the instrument displays twice a second the instantaneous
value of illuminance expressed in Lux or fc. This value gives information
about illuminance local conditions.
Max and min values are also displayed.
The operator can at any time by pressing following keys:
: Reset minimum and maximum values
: Enable pause
: Continue measurement
5
Over-range
Under conditions of measuring range excess, defined at 200,000 lux, an over-
range pictogram appears. It comes fleetingly for an illuminance exceeding
200,000 lux. Displayed value will be 200.1 klux.
6
Power source
When the instrument is equipped with alkaline batteries, it can operate for 72
hours minimum. A symbol informs the user about electric power remaining.
If battery is low, less than 1 bar on the pictogram, the instrument stops
measuring, saves current measurement and switches off.
7
Servicing
The LX 200 conception allows a reduced maintenance, which consists in changing batteries
and cleaning the instrument and sensor with a slightly dampened cloth. A particular
attention must be paid to the white disc covering the silicon photodiode which surface
must not have dirts or scratches.
8
Regular checking
Like most measuring instruments, it is strongly recommended to regularly control and
calibrate LX200 instrument. The sensor sensitivity decreases depending on measurement
durations and illuminance intensity. Return to the manufacturer each year will provide
necessary metrological traceability.
Publicité
