Grundig MC 8840 Mode D'emploi page 26

OPERATION_______________________________
For trimming contours, remove
7
the adjustable comb
the appliance without the combs
(then, depending on the set-
ting, the cut length amounts to
0.5,1.2,1.9 or 2.5 mm).
CLEANING_AND_CARE______________________
General_information
The appliance must be cleaned
regularly so that you can continue
to enjoy its top performance and
optimum results.
Cleaning_
1_
Press the On/Off switch
switch off the appliance and un-
plug the power adapter if you are
running it from the mains.
2_ Remove the adjustable comb
from the appliance. Clean the
cutting head
brush provided.
J
3_
Remove the cutting head
pushing the blade outwards. Clean
the cutting head
in the appliance with the cleaning
brush provided.
J
26 ENGLISH
A
. Use
E
with the cleaning
B
B
and the cavity
B
4_
Insert the cutting head
to
placing the claw into the cavity
and pressing on the cutting head
until it clicks on its place.
A
by
Notes
Never use water or any other liq-
7
uids to clean the appliance. Only
use the cleaning brush provided.
by first
B