Publicité
Les langues disponibles
Les langues disponibles
3
Description
3.1
Product overview
3.2
Intended use
The product described is an electrically powered diamond grinder for dry-grinding and fine-grinding mineral
materials. Use the diamond grinder only in combination with a dust extractor.
The grinder is designed exclusively for dry abrasive removal of uncoated mineral materials and thin coatings
on concrete and similar mineral materials, with a maximum layer thickness of 3 mm (0.12 in).
3.3
Inadmissible misuse
Do not use accessory tools that are not approved for this product. This includes cut-off wheels, diamond
cut-off wheels and rotary wire brushes.
Do not use the product for wet grinding, do not grind projecting objects such as nails or screws.
Do not use the product with if slats on the dust hood are worn; never use the product without a dust extractor.
Never use the grinding pad at a speed for which it is not approved.
Static electricity can disable the product's electronics. Use an anti-static suction hose in order to avoid
electrostatic effects.
3.4
Items supplied
Grinder, operating instructions, mounting flange, Keyless quick-action clamping screw.
Other system products approved for use with this product can be found at your local Hilti Store or at:
www.hilti.group
4
Technical data
For rated voltage, rated current, frequency and/or input power, refer to the country-specific type
identification plate.
*2240961*
1
2240961
Side handle
@
Clamping lever, side handle
;
Supply cord
=
Release buttons, bow grip
%
Height adjustment of the guard
&
Adjusting lever for segment opening
(
Segment opening
)
Guard with lamellar seal
+
Mounting flange
§
Diamond cup wheel
/
Keyless quick-action clamping screw
:
On/off button
∙
Locking button for continuous operation
$
LED status indicator
£
Buttons for gear selection
|
Gear indicator
¡
Connector for dust extraction
Q
English
19
Publicité
