SUNDAY Forno Volta 80 Instruction Pour Le Montage page 31

Once the support surface is in place, proceed with the assembly of the oven and
insulation.
Shows the structure of the Volta 80 oven (see page 26):
1/2/3/4/5/6/7
8/9/10/11/12
13/14/15
16
Shows the structure of the Volta 100 oven (see page 27):
1/2/3/4/5/6/7
8/9/10/11/12/14
15/16/17
18
Shows the structure of the Volta 120 oven (see page 28):
1/2/3/4/5/6/7
8/9/10/11/12/13/14/15
16/17/18
19
Spread a suitable layer of insulating material,
for example ceramic fi bre or similar mate-
rials, over the surface of the base (MINIMUM
OF 3-5 cm). This material must be able to
withstand a minimum of 500 °C (fi gure 5).
Position the fi re plane of the oven above the
layer of insulant (fi gure 6), checking that the
parts meet correctly.
DO NOT grout the parts or use any other
type of sealant (the spaces in between the
parts should fi ll with ash to prevent excessive
expansion). Check that the parts are stable
on the layer of insulant to prevent cracking.
If necessary, push the parts until they are
positioned stably.
- OVEN FIRE PLANE
- OVEN VAULT
- OVEN ARC
- STEEL DOOR
- Oven fi re plane
- Oven vault
- Front oven arc
- Oven door
- OVEN FIRE PLANE
- OVEN VAULT
- OVEN ARC
- STEEL DOOR
31