Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
•
Make sure that the respective accessory is properly mounted on the device (see
chapter "Assembly").
•
Pull the mains cord only as far out of the housing as you need, ideally up to the
yellow mark, but no further than up to the red mark on the cord!
•
Insert the mains plug in a properly installed socket that is easily accessible.
•
Press the On/Off switch to turn the vacuum cleaner on.
•
You can individually adjust the suction power with the suction power control.
•
Move the nozzle over the surface you want to clean. You can pull the vacuum
cleaner like a sled when vacuum cleaning.
•
After vacuum cleaning, press the On/Off switch again to turn off the vacuum
cleaner.
•
Pull the mains plug out of the socket, firmly hold the mains cord and push the
button for the cord winder down with your foot. By holding the mains cord, you
prevent the cord from "lashing" against your legs for example.
•
If you used the floor nozzle, hook it into the bracket on the back of the device.
•
To ensure optimum performance of the device, empty the dust bin each time
after using the device and clean the dust filter and exhaust filter regularly (see
chapter "Cleaning the device").
Tip:
•
An auxiliary air valve is located on the handle.
Slide the cover to open it, thereby reducing the
suction power if you want to vacuum off cush-
ions, carpets or light-weight, moveable objects
or materials. Normally, the auxiliary air valve
is closed so as not to unnecessarily reduce the
suction power.
23
Publicité
Table des Matières
