Hotpoint Ariston CM HPC GC0 H Mode D'emploi page 18

en
TROUBLESHOOTING
Problem Cause
Cannot
Power cord not connected
switch
to outlet.
machine on
Main switch (10) on "0".
No coffee
Movable section
delivery from
of machine's head
machine
incompletely closed.
Button 5.1 or 5.2 not
started.
Incorrect water tank
insertion.
Internal components with
limescale.
Pump not primed.
Water
Wrong capsule type.
leaking
Machine in
Power-Save
mode
If the problem persists contact an authorised Service Centre.
20
All manuals and user guides at all-guides.com
Solutions
Connect plug to power outlet compliant with
technical data on data plate "O".
Main switch (10) on "0".
Lift lever (1) and make sure capsule inserted in capsule
compartment (2). Force lever (1) back down until it rests
on matching support. Touch until lever locks in place (1)
and start button 5.1 or 5.2.
Touch button 5.1 or 5.2 again.
Insert tank (9) all the way into machine until
properly in place - clicking sound heard.
Descale machine as described in relevant
paragraph.
Make sure capsule compartment (2) includes no
capsules, lower lever (1) until it locks in place and touch
button 5.1 or 5.2 to pour out water. Try coffee delivery
from capsule again.
Make sure "Metodo Iperespresso" Illy capsule was used.
Make sure capsules for household use are used as
identified by text "Single-dose ground coffee capsules
for household use" on packaging and not capsules for
professional use as identified by text "Exclusively for
professional use".
Touch coffee button to start machine and wait until
it is ready for delivery - both coffee buttons will be
lit (fixed light). Touch button 5.1 or 5.2 again to
start coffee delivery.