Machine Status - Hotpoint Ariston CM HPC GC0 H Mode D'emploi

ALARM(S)
Buttons light up in sequence
+
Lit
+
Espresso button flashing
+
Lungo button flashing
Flashing slowly
Reduced illumination
Lit - fixed light
(only espresso button )
+
Flashing alternately
Lit - fixed light
(only lungo button )
+
Flashing alternately
+
Flashing fast
All manuals and user guides at all-guides.com

MACHINE STATUS

Machine is on and heating up.
Machine has reached correct temperature for coffee delivery.
Machine is making an espresso.
Settings for an espresso.
Machine is making a lungo.
Settings for a lungo.
Machine in Power-Save mode.
Machine enters into Power-Save mode after 60 minutes' use.
Touch any button to start machine again.
Machine needs descaling.
Machine shows descaling process was selected. So tank must
include descaling solution.
Machine shows second step of descaling process is under way.
Machine is supplying descaling solution. Only espresso button
flashing progressively.
Machine shows first step of descaling process is over. Rinse and
fill tank with fresh drinkable water.
Machine shows second step of descaling process is under way.
Machine is supplying water for circuit rinsing. Only lungo button
flashing progressively.
Machine malfunctioning. Switch off and then on after 30 seconds.
If defect persists, contact Service Centre.
en
eu
hotpoint.
19