Power-Save Mode - Hotpoint Ariston CM HPC GC0 H Mode D'emploi

en
• The manufacturer shall not be deemed
responsible for any damaged due to any
improper, incorrect or unreasonable use.
• The equipment was designed for household
and similar uses such as in:
- staff kitchen areas in shops, offices and
other work environments;
- farm houses;
- hotels, motels
environments by the guests;
- bed&breakfast-type environments.
• The machine is equipped with a valve that
keeps pressure constant. As a consequence
the coffee-delivery unit may be leaking water
drops.
• In case of appliance failure or malfunction,
switch if off and do not tamper with it.
If you need to have it repaired, ask a
Technical Service Centre authorised by the
manufacturer and ask for original spare
parts. Failure to comply with the above may
affect the safety of the appliance and void
the relevant warranty.
• The original packaging should be kept at
least for the entire warranty period, should
you need to return the machine to an
authorised Service Centre. Any damage due
to transport without proper packaging is not
covered by the warranty.
COFFEE MACHINE
INSTALLATION AND
OPERATION (A)
Before connecting the machine to the
electrical system, carefully read the
safety regulations in the "Important Safety
Precautions" chapter.
A1 Carefully pull out the water tank (9).
A2 Fill the tank with fresh drinkable water up to
the MAX mark.
Only fill the tank with fresh drinkable still
water. Warm water and other liquids may
damage the tank. Do not operate the machine
without water. Regularly replace the water in
the tank.
A3 Insert the tank into the machine all the way.
16
All manuals and user guides at all-guides.com
and other residential
Connect the plug into a power outlet. See the
following chapter on how to start the machine.
A4 Make sure the coffee-capsule compartment
(2) is properly closed before coffee delivery.
Never open during coffee delivery.
When you start the machine for the first
time or after the machine has not been
used for several days, we recommend placing
a container with a suitable capacity under the
delivery unit (3) and then pouring out at least
half a tank of water with no capsules in the
machine.
SWITCHING THE MACHINE
ON / OFF (B)
Start to machine as follows:
Check the water level in the tank (9). If needed, fill
it up as described above.
B1 Set the main switch (10) to the "I" position.
Buttons 5.1 and 5.2 will repeatedly light up
progressively from left to right to show that the
machine has started heating up.
B2 Place the cup on the cup holder.
B3 Wait for buttons 5.1 and 5.2 to light up (fixed
light) - a buzzer sounds to show that the proper
operating temperature
has been reached.
B4 Touch button 5.1.
Wait for water to come out of the delivery unit.
The delivery will stop automatically as soon as
the set quantity of water has been poured out.
You can also stop it by touching the button panel
again.
While heating up, the machine does not
allow any coffee delivery if buttons 5.1
and 5.2 are off or flashing.

Power-Save mode

The machine was designed to respect the