Hotpoint Ariston CM HPC GC0 H Mode D'emploi page 16

en
• Place one cup on the cup holder (7).
• Touch button 5.1 and hold it down until
you get the desired quantity of coffee. Then
release the button. The machine has been
set - when you press button 5.1 next it will
pour out the set quantity. This setting will
replace any factory settings.
MANUAL STOP FUNCTION
Press the selected button to stop coffee delivery
before it stops automatically.
Coffee delivery will stop automatically
after no more than 70 seconds anyway.
In such a case some coffee may spill out of the
cup.
CLEANING AND
MAINTENANCE (E)
• Before unplugging the appliance, make sure
the main switch (10) is on "0".
• Disconnect the plug from the electrical
system when cleaning the machine.
• Let the machine cool down before cleaning it.
• To extract the water tank (9) carefully pull it
upwards and then outwardly.
• Clean the appliance and attachments using
a damp cloth, then wipe it with a dry non-
abrasive cloth. Detergents should not be
used.
• Do not wash the appliance with abundant
jets of water and do not completely or partly
immerse it.
Clean the machine and its components
at least on a weekly basis.
Do not use any water that has remained
in the tank (9) for a few days. Wash it
18
All manuals and user guides at all-guides.com
and fill it up every day with fresh drinkable
water. Do not use ethyl alcohol, solvents,
abrasive
chemicals.
Clean the machine as follows:
running water.
warm water.
We recommend emptying the drip tray (8) and
used-capsule tray (6) at the same time.
microwave oven.
RECOMMENDATIONS
To enjoy a high-quality espresso remember to:
•
•
•
•
sponges
E1 Switch off and unplug the machine.
E2 Pull out the tank (9) and wash it under
E3 Pull out the drip tray (8) and wash it with
E4 Pull out from the front the used-capsule tray (6).
E5 Empty it of any remains.
The drawer includes the used capsules
and remaining liquids.
When you re-place the used-capsule
tray (6), make sure it is properly inserted.
Do not dry the machine and/or its
components in a conventional and/or
Change the water in the tank (10) at least on
a weekly basis.
Preferably use water whose total hardness
is lower than 12 French degrees to minimise
any deposit inside the machine.
Don't use distilled water.
Use warm cups.
and/or aggressive