Safety Notes; Important Notes; Functions - marklin E 10.12 Mode D'emploi

Safety Notes

• This locomotive is to be used only with an operating system desi-
gned for it (DC power = 18V±, Märklin AC, Märklin Digital,
Märklin Systems).
• Use only switched mode power supply units and transformers that
are designed for your local power system.
• This locomotive must never be supplied with power from more than
one transformer.
• Pay close attention to the safety notes in the instructions for your
operating system.
• The feeder track must be equipped to prevent interference with
radio and television reception, when the locomotive is to be run in
conventional operation. The 74046 interference suppression set is to
be used for this purpose.
• Do not expose the model to direct sunlight, extreme changes in
temperature, or high humidity.
• WARNING! Sharp edges and points required for operation.

Important Notes

• The operating instructions and the packaging are a component part
of the product and must therefore be kept as well as transferred
along with the product to others.
• Please see your authorized Märklin dealer for repairs or spare parts.
• The warranty card included with this product specifies the warranty
conditions.
• http://www.maerklin.com/en/imprint.html

Functions

• The mode of operation (mfx, Märklin Motorola, or DCC) is recognized
automatically.
• Possible addresses: Märklin 01 – 80, DCC 01 – 9999
• Address set at the factory: (Märklin) 10 / (DCC) 03
• Mfx technology for the Mobile Station / Central Station.
Name set at the factory: E 10 1240
• Adjustable acceleration (ABV).
• Adjustable Braking delay (ABV).
• Adjustable maximum speed.
• Setting locomotive parameters (address, acceleration/braking delay,
maximum speed, etc.): with the Control Unit and DCC (CV program-
ming), Mobile Station, or the Central Station.
• Headlights, changing over with the direction of travel.
• Can be switched to catenary operation.
• The model is designed for operation on Märklin 1 Gauge track. As
the consumer you assume the risk for operating on other makes of
track.
• Minimum radius for operation: 1020 mm / 40-1/6".
• Märklin claw couplers front and rear. You may have operations
problems if you use other makes of couplers.
• Only the train control functions and headlight changeover feature
are available in analog operation.
9
Betrieb • Operation • Fonctionnement • Exploitatie