Assembly Of The Darts; Designation And Function Of Each Of The Parts; Operation Of The Dartboard; Turning The Item On And Off - Crivit DS-5478 Règles Du Jeu Et Mode D'emploi

The cross in the middle of the drill
template marks the height of the bullseye
on the dartboard. Afterwards, mount the
dartboard with the screws and dowels
included.
Assembly of the darts (Fig. D)
Screw the tips and the shaft to the grip, as
shown, and insert the wings into the cross-slits.
Note: Please ensure that the tip is screwed
in tightly to the flat side of the barrel.
Designation and function of
each of the parts (Fig. A and C)
Single: Number of points as shown
1
Double: Number of points x 2
2
Triple: Number of points x 3
3
Bull: Outer ring counts for 25 points;
4
Bullseye counts for 50 points
Catching border: Border, no points
5
Loud-speaker
6
Connection point for power adaptor
7
4 LED displays
8

Functional buttons

9
Play list
10
Dart holder
11
Drill holes
12
Mounting bracket (back)
13

Operation of the dartboard

Turning the item on and off

The item is fitted with an automatic switch-
off system. To switch the item on, connect
the power adaptor with the dartboard and
mains power point. If the item is not used for
more than 10 minutes, displays and systems
are automatically switched off (standby
mode). As long as the power adaptor
is plugged in, the item will "remember"
the current score. Via the pressing of any
function button, the item will switch itself on
again.
To switch of the item completely, unplug it at
the mains.
10 GB/IE/NI
All manuals and user guides at all-guides.com
Functional buttons (Fig. A)
POWER
Press the POWER button to switch the item
on and off.
GAME
Press the GAME button to select a game.
The displays will show the game number,
above left, the name of the game, above
right, below left, the game options are
shown, and below right, the number of
players.
Note: While the game is running, press
GAME once to stop the game and restart.
SELECT
Press the SELECT button to select options for
all players within the current game.
Note: Abbreviations for the various options
are shown below left on the display.
PLAYER
Press the PLAYER button to select the
number of players before the game begins.
You have options to play with 1 to
16 players, or to play team games (2-2 to
8-8).
During a game, the first four players' points
are displayed when you press the PLAYER
button.
Keep the PLAYER button depressed to see
further players' points.
Note: The amount of players is shown on
he LED displays, via the relevant lights.
DOUBLE/MISS
Press the button DOUBLE/MISS, to set the
function Double In or Double Out for the
G01 game.
Press 1 time: Double In,
Press 2 times: Double Out (red light on the
left Score Board, 10),