Malfunc Ons - kiwy SLF 123 Manuel D'instructions

Isofix anchor points.
3 Check that the vehicles seat belt is correctly fi ed around the car
seat.
4 Check that the vehicles seat belt has not become twisted or
trapped in any way.
5 Check that the vehicles seat belt is fully ghtened and the car seat
is held firmly against the vehicle seat .
6 Check that the safety harness of the child car seat is adjusted and
tensioned correctly.
7 Check that the safety harness buckle of the child car seat is
fastened correctly.
8 Check regularly all important parts for possible damage.
9 Check the correct opera on of all components.
10 Check that the child seat does not get jammed in the car door,
seat runners, etc., in order to prevent breakage, damage, wearing etc.
Remember: Although this child seat has been designed and
approved by the latest ECE Standards, an incorrect installa on or use
may not protect your child in case of accident.
So, always follow the check list above before star ng any journey
with the car seat fi ed in your vehicle.
Always check that the vehicles seat belt is correctly posi oned before
placing your child in the SLF 123 child seat.
Warning:
Any child seat ghtly fixed on the vehicle seat may leave signs, due to
the measures to be adopted in compliance with f the Safety
Standards. This seat is designed to minimize this phenomenon.
The manufacturer is not liable for possible signs resul ng from the
normal use of this seat.
VI. Malfunc ons
. In case of incidental dropping or any evident damage, your child
seat must be inspected by the manufacturer.
. Any malfunc on of the harness may endanger your child protec on.
10