Turbosound Siena TSP-AN Serie Guide De Démarrage Rapide page 29

56
TSP-AN Series
Specifications
TSP122-AN
System
50 Hz – 18 kHz ±3 dB
Frequency response
43 Hz – 20 kHz -10 dB
Nominal dispersion 70° H x 50° V @ -6 dB Points
Maximum SPL 133 dB peak
Crossover type Active
1 x 12" (316 mm) LF driver
Transducers
1 x 1" (25.4 mm) HF compression driver
Independent HF, LF,
Limiter
peak and rms
Amplifier
Maximum output power* 2500 W
Type Class-D
Protection Short circuit, thermal
Connectors
Input/link 1 x Combo Jack/XLR, 1 x XLR
Sensitivity +4 dBu or +14 dBu software switchable
Input impedance 40 kΩ balanced
Maximum input level +22 dBu
Ultranet input/link 2 x RJ45
Mains supply Neutrik powerCON 20A†
Controls
Rotary push-encoder and level control
DSP
Buttons for process, setup, exit, enter
User DSP Functions
Factory EQ presets Positioning, sound mode, FBQ
Display LCD 128 x 32, blue, backlit
Delay 0 - 300 ms
High and low shelving EQ
Equalisation
2 x parametric EQ
Limiter Zero attack input limiter
20 total presets,
Presets
19 user-definable
Crossover High pass L-R 24 dB/oct
Protection Lock-out function for all settings
Ultranet Digital Network
Digital processing
A/D conversion 24-bit,44.1/48 kHz sample rate
Converter type 24-bit,delta-sigma
System
Signal 16 channels
Latency < 0.9 ms
Frequency response 20 Hz to 20 kHz (+0 / -3 dB)
Dynamic range Typical 92 dB
Cabling
Cables Shielded CAT5
Cable length Max. 246 ft / 75 m recommended
TSP152-AN TSP118B-AN
41 Hz – 18 kHz ±3 dB 35 Hz – 90Hz ±3 dB
35 Hz – 20 kHz -10 dB 32 Hz – 100 Hz -10 dB
70° H x 50° V @ -6 dB Points Half space
133 dB peak 134 dB peak
Active Active
1 x 15" (394 mm) LF driver
1 x 18" (460 mm) LF driver
1 x 1" (25.4 mm) HF compression driver
Independent HF, LF,
Independent LF, peak and rms
peak and rms
2500 W 3000 W
Class-D Class-D
Short circuit, thermal Short circuit, thermal
1 x Combo Jack/XLR, 1 x XLR 1 x Combo Jack/XLR, 1 x XLR
+4 dBu or +14 dBu software switchable +4 dBu or +14 dBu software switchable
40 kΩ balanced 40 kΩ balanced
+22 dBu +22 dBu
2 x RJ45 2 x RJ45
Neutrik powerCON 20A† Neutrik powerCON 20A†
Rotary push-encoder and level control Rotary push-encoder and level control
Buttons for process, setup, exit, enter Buttons for Process, Setup, Exit, Enter
Positioning, sound mode, FBQ Positioning, sound mode, FBQ
LCD 128 x 32, blue, backlit LCD 128 x 32, blue, backlit
0 - 300 ms 0 - 300 ms
High and low shelving EQ High and low shelving EQ
2 x parametric EQ 2 x parametric EQ
Zero attack input limiter Zero attack input limiter
20 total presets, 20 total presets,
19 user-definable 19 user-definable
High pass L-R 24 dB/oct High pass L-R 24 dB/oct
Lock-out function for all settings Lock-out function for all settings
24-bit,44.1/48 kHz sample rate 24-bit,44.1/48 kHz sample rate
24-bit,delta-sigma 24-bit,delta-sigma
16 channels 16 channels
< 0.9 ms < 0.9 ms
20 Hz to 20 kHz (+0 / -3 dB) 20 Hz to 20 kHz (+0 / -3 dB)
Typical 92 dB Typical 92 dB
Shielded CAT5 Shielded CAT5
Max. 246 ft / 75 m recommended Max. 246 ft / 75 m recommended
TSP122-AN
Power Supply
1/8
Power consumption 90 W @ max power
Voltage (fuses)
USA / Canada 120 V~, 60 Hz (T 15 A H 250 V)
220-240 V~, 50/60 Hz
UK / Australia / Europe
(T 10 A H 250 V)
220-240 V~, 50/60 Hz
Korea / China
(T 10 A H 250 V)
100 V~, 50/60 Hz
Japan
(T 15 A H 250 V)
Enclosure
613 x 384 x 340 mm
Dimensions (HWD)
(24.1 x 15.1 x 13.3")
Net weight 21.5 kg (61.2 lbs)
3/4
Construction 18 mm ( ") birch plywood
Finish Semi matt black paint
Grille Powder coated perforated steel
Flying hardware M10 x 6 points
Accessories
TSP122-PC protective cover for TSP122
*independent of limiters and driver protection circuits
†Only qualified personnel are allowed to modify the AC-Main cord and to adhere to all applicable national standards.
Quick Start Guide
TSP152-AN TSP118B-AN
1/8 1/8
90 W @ max power 180 W @ max power
120 V~, 60 Hz (T 15 A H 250 V) 120 V~, 60 Hz (T 15 A H 250 V)
220-240 V~, 50/60 Hz 220-240 V~, 50/60 Hz
(T 10 A H 250 V) (T 10 A H 250 V)
220-240 V~, 50/60 Hz 220-240 V~, 50/60 Hz
(T 10 A H 250 V) (T 10 A H 250 V)
100 V~, 50/60 Hz 100 V~, 50/60 Hz
(T 15 A H 250 V) (T 15 A H 250 V)
717 x 443 x 360 mm 693x 523 x 725 mm
(28.2 x 17.4 x 14.1") (27.2 x 20.5 x 28.5")
27 kg (61.2 lbs) 46.3 kg (61.2 lbs)
3/4 3/4
18 mm ( ") birch plywood 18 mm ( ") birch plywood
Semi matt black paint Semi matt black paint
Powder coated perforated steel Powder coated perforated steel
M10 x 6 points
TSP152-PC protective cover for TSP152 TSP118B-PC protective cover for TSP118B
57