Panasonic PT-52LCX66-K Manuel D'utilisation page 30

Automatic program setting
Automatically searches and adds receivable
channels to memory.
Press MENU to display the Main Menu screen.
1
Press to select "Setup" icon.
Press to display the Setup
menu.
2
Press to select "Program
channel".
Press to display the Program
channel menu.
3
Press to select "Auto".
Press to enter the Auto menu.
4
5
Menu
Picture
Audio
Timer
Lock
Memory card
Setup
6
Setup
CH scan All
Language
Program channel
Input labels 7
After Auto program is complete, the unit will return
CC
to Manual program mode. To place the channels
Other adjust
that were located by auto scan in memory, move the
cursor to "Apply" and press OK. (p. 30-31)
If OK is not pressed after selecting APPLY, the
channels will not be memorized.
Notes:
• Some channels with very weak signals may be locked into
memory. If desired, these channels can be deleted man u al ly
using the "Manual program setting". (p. 30)
• "Auto program" must be done when you select the input
Program channel
signal for the first time or whenever you change the antenna
configuration.
Auto
Manual
Signal meter
Press to select "ANT In".
Press to select "Antenna" or
"Cable".
Auto program
ANT In ◄ Cable ►
Mode All
Start scan
Press to select "Mode".
Press to select "All" or
"Analog".
Auto program
ANT In Cable
Mode ◄ All ►
Start scan
Press to select "Start scan".
Press to start Scan.
Now scanning analog channel...
Progress
29