Machine Description - Battipav Prime 500 Mode D'emploi

GB
DBS DISCK BRAKE SYSTEM ART 90XXXV
THE MACHINE IS EQUIPPED WITH ELECTRONIC MOTOR BRAKE.
WITHOUT THE CUTTING TOOL INSTALLED, THE MACHINE STOPS BEFORE THE ESTIMATED TIME. WAIT FOR THE
BRAKING TIME BEFORE STARTING AGAIN.

MACHINE DESCRIPTION

The PRIME site cutter is a machine intended specifically for cutting bricks, natural stone, granite, concrete items and similar
materials, up to a thickness of 275 mm.
The machine uses a wet diamond tipped tool cutting system and is intended for personnel specialized in the construction sector.
The operator works in front of the narrow side of the machine, within reach of the operating controls, and positions the material to be
cut on the moving worktop. He/she starts the machine and moves the cutting head to bring the tool into contact with the material.
RECOMMENDED USE
CUTTING TOOL DIAMOND BLADE WET CUTTING
LASER/SECTORS: cement, natural stones, granite, abrasive materials (With narrow slots, max 5 mm).
THE TOOL / MATERIAL TO BE CUT MATCHES ARE PURELY INDICATIVE. ALWAYS FOLLOW THE INTENDED USE INDICATIONS
PROVIDED BY THE CUTTING TOOL MANUFACTURER BEFORE ANY APPLICATION.
Admissible working conditions: INTERMITTENT - S6 SERVICE 40%
SYMBOLS AND SIGNS:
Danger/prohibition stickers are applied to the machine where necessary. Look at these prior to using the machine.
35
A1 Use of prescribed PPE obligatory (Safety eyewear and earmuffs)
A2 Read operating instructions before each use.
A3 Use of prescribed PPE obligatory ( Protective Gloves )
A4
Warning! Danger of accidental contact
A5 Earth connection
B1 Do not use wood or metal discs
B2 Do not wash with water under pressure
B3 Lock the carriage
MANUFACTURER AND MACHINE
The nameplate shown is fitted directly on the machine. It indicates all the references and information necessary for safe operation.
34
A Machine model
B Item
C Serial number
D Power supply voltage
E Power supply frequency
F Current absorption
G Installed power rating
H Tool rotation speed
I Class of protection
L Starter capacitor
INSTALLATION
TRANSPORT
The PRIME machine can be easily moved by using the transport handles. Before carrying the machine make sure that:
7
• the motor carriage is locked by means of the locking knob located on the slide rail;
10 • the tube-holder rod is out of its housing;
• the legs are in transport position;
1
To move the machine, use a four-arm tie rod with the capacity to lift 200 kg or at least 20% more than the machine
1
weight, by making use of the hooks in the transport handles.
28
40%
60%
Under load running
Repose
C1 Recovery tank water level
D1
Motor limit switch
E1 Instructions
F1 Warning! Verify sense direction of rotation
F2 Laser Accessory
H1
Presence of electrical energy
G1 Warning! Lock the carriage
M IP Level
N Year of manufacture
O Max tool diameter
P Internal tool diameter
Q Accessories
R Accessories
S Manufacturer's name
T Manufacturer's name and address
U Certification Marks
Battipav srl