Krups KP1010 Mode D'emploi page 10

• Press the brew button (O) to start the preparation. The indicator light will blink during the
brewing process.
When the cycle is completed, the indicator light will be steady again and the machine will be
ready for the next cycle.
At the end of the brew cycle there is a steam purge. You may see some steam
dissipate from the unit.
If brewing stops check to see that there is water in the tank.
• Remove and discard the pod(s) using the pod holders when complete.
• After preparing a specialty beverage such as a latte or cappuccino, immediately clean the spray
heads and the seals using a damp cloth, then thoroughly wash the pod holders. In addition,
you can run a cycle without pods to rinse the appliance.
Never open the upper lid when the indicator light is blinking (brewing in progress).
The coffee machine will automatically shut off after 1 hour if not used.
Cleaning
• Run a brewing cycle without pod(s) to rinse the appliance.
• Unplug the appliance.
• Do not clean the appliance when hot.
• Clean with a damp cloth or sponge.
• Never put the appliance in water or under running water.
• The pod holders (H), the drip tray (A) and its plate (B) are dishwasher safe.
10
Home cafe KP1000 US.PM6.5 10 18/04/05, 14:28